Dickie Dyer Heavy Duty Immersion Heater Spanner 86mm

By Dickie Dyer Product code: 62043 Pack size: Each

£8.99 Exc. VAT £7.49

Product Details

Heavy duty, unbreakable SG cast iron. For reaching recessed elements on immersion heaters. Compatible with most immersion heaters.

Heavy duty, unbreakable SG cast iron spanner. Designed for fitting or removing recessed elements on immersion heaters. Compatible with most immersion heaters.

Technical Specification
Brand Dickie Dyer
Manufacturer ID 849025
Delivery details

Covid-19 Update

  • FREE Next Business Day delivery is available for orders over £25 for orders placed before 9pm Mon-Thur and before 6pm Sunday
  • Saturday and Sunday delivery is available for orders placed before 6pm on Friday for Saturday Delivery and 4pm Saturday for Sunday delivery. Items over 30kg can only be delivered next Business Day Mon-Fri. Orders placed after 9pm Thursday will be delivered the following Monday see here for details
  • Pre-12 delivery service is now available for weekday deliveries. Place your order before 9pm Mon-Thur for next business day delivery by 12pm. Orders placed after 9pm Thur and before 6pm Sunday will be delivered by 12pm Monday. UK mainland only
  • Once your order has been dispatched you will receive an invoice email with the courier details and your tracking number
  • Alternatively go to MyAccount, click on your Order History, click on the TRACK icon to link through to the carrier website and the tracking details for your delivery
  • Delivery direct from suppliers is available and specific delivery times will be displayed on the product page
Order Value: Under £25 Over £25 but less than £75 £75 & Over
Next Business Day Mon-Fri (order by 9pm Mon-Thur & Sun by 6pm) delivered before 6pm £5 Free Free
Pre-12 Delivery Mon-Fri (order by 9pm Mon-Thur & Sun by 6pm) delivered before 12pm next day £10 £5 £5
Remote areas standard delivery (2-4 days) £5 Free Free
Saturday Delivery (order by 6pm Friday) delivered before 6pm £10 £5 Free
Sunday Delivery (order by 4pm Saturday) delivered before 6pm £10 £5 Free

Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details

Covid 19 Update

Click & Collect

We are fully open and delighted to welcome our customers into our branches.

Our opening times are 7am-8pm Monday-Friday, 7am-7pm Saturday and 9-4pm Sunday

Our speedy 5 min Click and Collect service remains one of the safest ways to buy from us and minimises your time in store. Place your order at toolstation.com 7 days a week, and travel to store once your collection confirmation is received by email or text message.

Don’t forget your mobile number – Please ensure that your mobile number is added so that we can text you when your order is ready to collect.

Your items will be held at your selected Toolstation branch for 14 days, after which point your order will be put back to stock and refunded automatically.

Dickie Dyer Heavy Duty Immersion Heater Spanner 86mm is rated 3.7 out of 5 by 32.
Rated 5 out of 5 by from Immersion heater spanner Excellent tool for removing old immersion heater from water tank
Date published: 2021-06-07
Rated 4 out of 5 by from It’s a spanner and it works Did the job it was intended for although staff were rude to the point that I’ll try elsewhere first from now on.
Date published: 2021-05-23
Rated 4 out of 5 by from Did the job Great item very heavy and does the job but a bit expensive if your only going to use once
Date published: 2021-04-25
Rated 4 out of 5 by from Didn' fit generic element but you can make it work After trying the heater removal tool with the box and bar, and after bending the bar - I opted to try this one! It didn't quite fit the element I needed to remove, but i seloptaped 20p pieces to it (bodged it), allowing the tool to grip on the stubborn element to be removed. With a few taps with a hammer it came loose. Its worth noting that alongside this purchase I also brought the generic 3kW 240V water heater element from toolstation- and this tool did not fit this either!...so the tape and coin trick came in handy again when making tight. This tool is 86mn...your element probably isnt..Good luck!
Date published: 2021-04-19
Rated 4 out of 5 by from Solid tool Good, solid tool, more robust than the socket and bar type. Would be five stars if handle was either a bit longer or easier to slip an extension over.
Date published: 2021-03-25
Rated 5 out of 5 by from Got me out of trouble! This is a very robust wrench that should dislodge the most reluctant of elements from your immersion tank.
Date published: 2021-03-16
Rated 5 out of 5 by from Forget other spanners, this is the one to have. This is the perfect tool for removing immersion heaters, its heavy and wont bend or distort when you use it. Fit the spanner on tightly and if the heater wont come out by hand when you rotate the spanner, give it a sharp tap with a hammer to ease removal. Do this with a near full cylinder of water to prevent the copper cylinder distorting. Make sure you undo in the right direction ! Remove the cable first after isolating the electricity to the circuit. Some say the spanner didnt fit but it fitted my immersion perfectly.
Date published: 2021-03-14
Rated 5 out of 5 by from At last, a DECENT immersion element spanner! When it came to removing a blown immersion heater element, which a previous plumber had GLUED in place, rather than using a washer, there was no way the cheap pressed steel spanner would unscrew the element - it was too thin to get a decent grip on the thin drive flange of the element, and being cranked, the turning force wasn't appliedb in line with the flange, and so the spanner just slipped off every time! Plus, I'm not enjoying watching the copper tank flexing... Quick trip to Toolstation, and I'm armed with a spanner that actually looks as though it was designed by an engineer! Nice deep drive flanges, with a cast ring to locate the spanner against the element. Decently long handle, with an anvil on the end to use a hammer if necessary. Two sharp taps from a small club hammer, and the glued joint was free, with no flexing of the tank wall, no slippage, and no cursing! I always relish how easy many tasks become if only you have the right tools, and believe me, this is THE right tool for immersion elements 10/10
Date published: 2021-02-01
  • y_2021, m_6, d_14, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.17
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_32
  • loc_en_GB, sid_62043, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 11.44ms

You might also like

You know the drill, we all love cookies… the ones we use on this site are for analytics, personalising your experience and helping with our advertising to show you more of what we know you’ll love. By hitting accept, you agree to our website cookies.

Hey, browse our site often?