SIP 05736 Weldmate T136 MIG Gas / Gasless Welder 230V

By Sip Product code: 66345 Pack size: Each

£194.89 was £214.89 Exc. VAT £162.41

Delivery Address
Not set

Collection Address
Not set

Product Details

• Power supply: 13A
• Flux corded wire: 0.6 - 0.8mm
• Weld thickness range: (mild steel) 0.7 - 5.4mm
• Welding rate: 30 - 135 amp (peak)
• Weight: 22kg

Technical Specification
Brand Sip
Manufacturer ID 5736
Voltage 230
Type MIG Welder
Delivery details

Covid-19 Update

  • FREE Next Business Day delivery is available for orders over £25 for orders placed before 9pm Mon-Thur and before 6pm Sunday
  • Saturday and Sunday delivery is available for orders placed before 6pm on Friday for Saturday Delivery and 4pm Saturday for Sunday delivery. Items over 30kg can only be delivered next Business Day Mon-Fri. Orders placed after 9pm Thursday will be delivered the following Monday see here for details
  • Pre-12 delivery service is now available for weekday deliveries. Place your order before 9pm Mon-Thur for next business day delivery by 12pm. Orders placed after 9pm Thur and before 6pm Sunday will be delivered by 12pm Monday. UK mainland only
  • Once your order has been dispatched you will receive an invoice email with the courier details and your tracking number
  • Alternatively go to MyAccount, click on your Order History, click on the TRACK icon to link through to the carrier website and the tracking details for your delivery
  • Delivery direct from suppliers is available and specific delivery times will be displayed on the product page
Order Value: Under £25 Over £25 but less than £75 £75 & Over
Next Business Day Mon-Fri (order by 9pm Mon-Thur & Sun by 6pm) delivered before 6pm £5 Free Free
Pre-12 Delivery Mon-Fri (order by 9pm Mon-Thur & Sun by 6pm) delivered before 12pm next day £10 £5 £5
Remote areas standard delivery (2-4 days) £5 Free Free
Saturday Delivery (order by 6pm Friday) delivered before 6pm £10 £5 Free
Sunday Delivery (order by 4pm Saturday) delivered before 6pm £10 £5 Free

Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details

Covid 19 Update

Click & Collect

We are fully open and delighted to welcome our customers into our branches.

Our opening times are 7am-8pm Monday-Friday, 7am-7pm Saturday and 9-4pm Sunday

Our speedy 5 min Click and Collect service remains one of the safest ways to buy from us and minimises your time in store. Place your order at 7 days a week, and travel to store once your collection confirmation is received by email or text message.

Don’t forget your mobile number – Please ensure that your mobile number is added so that we can text you when your order is ready to collect.

Your items will be held at your selected Toolstation branch for 14 days, after which point your order will be put back to stock and refunded automatically.

SIP 05736 Weldmate T136 MIG Gas / Gasless Welder 230V is rated 3.4 out of 5 by 9.
Rated 3 out of 5 by from Good welder but.... Good welder for the money but im annoyed at Toolstation as thebdescription is poor, basically i'll sum up here, if you want to use gas you will need to puchase the regulator from somewhere else i had to get from from "Halfrauds" and then you have another problem that the pipe supplied with the welder needs an adaptor to fit onto the seperatley purchased regulator which is actually SIP's own. I really like toolstation over the competition but they really need to be clearer on the descriptions of what you need additionally.
Date published: 2021-04-12
Rated 5 out of 5 by from surprisingly good welder for price i restore classic cars for a living so have to weld on a semi regular . i had a normal sip gas mig that was good but in the middle of a job decided to stop working. this was available locally so to the plunge . must say was welding in 5mins its so easy no setting up the gas and getting the flow correct. the welds produced are as good as with gas , you can also set it up to use gas if required. the comtols are very basic and could properly do with a little more control. but if you new to welding or only need to weld every now and again its much better than traditional mig.i an sure there awesome to there that will sagas is best but i will be using gas less . cons welding wire slot more expensive , but you don't have to by gas but still works out more for like for like welding job . found i went through more wire than conventional pros with a little patience i think any one could weld using gas less super easy to set up
Date published: 2021-04-02
Rated 5 out of 5 by from Unboxing to Welding in under 10 minutes. I needed to replace my recently expired welder and the Toolstation website made my decision very easy. I'm a hobbyist welder and had a great choice of machines within a modest budget range. The Weldmate T136 is simple to set up and I was welding within 10 minutes of unboxing. Controls are intuitive and the build quality is excellent!
Date published: 2021-03-01
Rated 5 out of 5 by from great features, gas and gasless, powerful purchased two days ago. my pal whose been in the garage business for decades reckons its better than all the previous welders he's used, including some £800 machines
Date published: 2020-05-29
Rated 1 out of 5 by from Dont waste your time Wire feed did not work, never got to use it. Wasted a a day and fuel returning. Held me up 3 days on the job i was doing and also had to wait 5 days for the money to be refunded into my account.
Date published: 2020-03-04
Rated 1 out of 5 by from ok welder badly made torch badly made torch handle, gas valve leaks
Date published: 2019-08-14
Rated 4 out of 5 by from Car body panels Reasonable welder,to do car body panels and chassis floor pan which is a touch thicker than side panels. As most welders perform well when new. I've had second hand SIP welders that have eventually stopped working. The only issue I've had with this,is the polarity wire inside,was stopping the fan from turning. A zip tie sorted that out.
Date published: 2019-05-09
Rated 4 out of 5 by from Great unit, but.. I have had a SIP 100 MIG for 20+ years and even though I had reliability issues in the last few months it was brilliant! It finally gave up the ghost last month and hence the new purchase. The new T136 performs even better than the old unit with smoother feed and improved welding - So very pleased!! However, changing the gas feed connector on the back resulted in the paint flaking off, so clearly SIP have used thinner material and poor paint for the casing - It's a shame, as it lets the unit down!!
Date published: 2018-10-16
  • y_2021, m_4, d_16, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_GB, sid_66345, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 46.36ms

You might also like

You know the drill, we all love cookies… the ones we use on this site are for analytics, personalising your experience and helping with our advertising to show you more of what we know you’ll love. By hitting accept, you agree to our website cookies.

Hey, browse our site often?